SACC-M12FSB-5CON-PG9 SH AU

https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system connector, PROFIBUS, INTERBUS, 5-position, shielded, Socket straight M12, B-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, External cable diameter 6.5 mm ... 8.5 mm Why buy this product  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 STK GTIN GTIN 4017918900434 Weight per Piece (excluding packing) 47.940 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External diameter 6.5 mm ... 8.5 mm Stripping length of the sheath 33 mm (for outside cable diameter < 5.5 mm, strip 21 mm off and fold the cable shield back over the cable sheath) Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A 01/23/2017   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Technical data General Rated voltage 60 V DC 48 V AC Number of positions 5 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Signal type/category PROFIBUS INTERBUS Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² Conductor cross section AWG 24 ... 18 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with 4 mm ... 8 mm external cable diameter) 1 Nm ... 1.4 Nm (Pressure nut with 8 mm ... 12 mm external cable diameter) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 HB Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values 01/23/2017   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Drawings Schematic diagram Schematic diagram 3 4 5 1 5 2 4 3 2 Cable connection side M12 (screw connection) 1 Pin assignment M12 socket, 5-pos., B-coded, female side Dimensional drawing Functional drawing Ø20 M12 ca. 56 18 M12 x 1 socket, straight, shielded Classifications eCl@ss eCl@ss 4.0 27140815 01/23/2017   Page 3 / 6 https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Classifications eCl@ss eCl@ss 4.1 27140815 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / EAC / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details EAC      EAC-Zulassung EAC      7500651.22.01.00246 01/23/2017   Page 4 / 6 https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal current IN 4A Nominal voltage UN 60 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal current IN 4A Nominal voltage UN 60 V cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 221474  FILE E 221474   Accessories Accessories Protective cap Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     01/23/2017   Page 5 / 6 https://www.phoenixcontact.com/gb/products/1507777 Bus system connector - SACC-M12FSB-5CON-PG9 SH AU - 1507777 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/23/2017   Page 6 / 6